Single Sided Aluminum 94v0 PCB Circuit Board Good Heat Dissipation

A thin layer of thermally conductive but electrically insulating dielectric is laminated between a metal base and a copper foil. The copper foil is etched into the desired circuit pattern and the metal base draws heat away from this circuit through the thin dielectric.

Aluminum PCB is a unique metal-based copper clad laminate; it has good thermal conductivity, electrical insulation and machining performance.

Aluminum PCB is one of metal-based pcb, including copper foil, thermal insulating layer and metal substrate, its structure divide into three layers:

1. Circuit layer: the equivalent of an ordinary PCB, copper thickness from 1oz to 10oz.
2. Insulation layer: Insulation is a layer of thermal insulating material with low thermal resistance. Thickness: 0.003 "to 0.006" inch is the aluminum pcb core technology.
3. Based Layer: a metal substrate, usually aluminum or copper may be chosen.

The heat dissipation afforded by this construction is dramatically superior to standard FR-4 constructions. The dielectrics used are typically 5 to 10 times as thermally conductive as conventional epoxy-glass and a tenth of the thickness resulting in thermal transfer exponentially more efficient than a conventional rigid PCB.

Although Power Converters and LEDs are the largest users of these products, Automotive and RF companies are also looking to take advantage of the benefits of these constructions. A single layer construction is the simplest, most thermally conductive and most cost effective construction. Designs with higher component counts may not have room for all the required routing on a single layer. In this case a two layer design is required. A thin sheet of dielectric, typically around .006” thick, is drilled, plated and etched much like a standard double sided printed circuit board. The sheet is then laminated using thermally conductive bonding material to the metal base. This extra routing layer results in components farther away from the heat-sink and reduced heat transfer so this construction is recommended only when necessary.

FAQ:

Q1. Are you a factory or trade company?

Shenzhen Yizhuo Electronics Co., Ltd. Is a National High-Tech Enterprise Certified By Iso9001: 2015 International Quality Management System. It Was Founded In 2012.Has Been Committed To The Innovation And Sustainable Development Of Electronic Technology. It Is Used In The Manufacture And Sales Of Various Metal Pcbs, Leds And Related Products. The Products Are Widely Used In Lighting, Electronics, Machinery, Communications, Automotive And Other Industries That Require Heat Dissipation. With a Senior Management Team And r & d Design Team With An Average Industry Experience Of More Than 8 Years, We Have Created a Strong Worldwide Distribution Network And Sales Channels, And Our Products Sell Well In Asia-Pacific, Europe, America, And The Middle East.